- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
海绵压缩变形试验箱
-
海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
海绵压陷硬度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩蠕变测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵空气透气率测试仪
-
海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:1000-海绵拉伸撕裂试...
-
慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高输出功率小工作电流实验设计仪(耐电弧放电实验设计仪)-(估算机设定)
High voltage low current tester (arc resistance tester) - (computer control)
食商品分类称:耐电弧试验机
Product name: electric arc resistance tester
产品设备形号:NDH-A
Product model: NDH - A
做到规格:GB/T 1411-2002《混合物电绝缘建筑材料耐高压得很低瞬时电流电弧击穿击穿的做实验的时候》(等同于IEC 61621-1997)及ASTM D495等想要的想要的设计开发的,并契合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
主要的实用领域及功能性:
本实验机是依据采采用交流接触器、电商和家居电商等制造行业的电焊工用涂料、光敏硅胶粘合剂胶和电绝缘带层性电阻漆等电绝缘带层性电阻涂料的耐焊弧特点考核评价,主采用固状电绝缘带层性电阻涂料如:涂料、聚酯薄膜、光敏硅胶粘合剂、黑云母、淘瓷、玻离、电绝缘带层性电阻油、电绝缘带层性电阻漆、瓦楞纸等物质的耐焊弧特点测试图片;
本应力测试机由微机把握运营,可能表明当今实践程序及实践时候,实践结束后后并保管当今实践数据库,并可印刷.标实验所意见书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为下上整体的结构,下边为操作方法体统,上面为试验装置箱。
2 本好产品利用*新自动化有效控制高技术,进行选泽系统程序(IEC或ASTM)可电脑自动进行实验设计,并在台式机上提示疲劳试验步骤和结杲。
3 **使用性能优异,抗侵扰效果强,测试图片计算精性强。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧焊接通断时期计算误差:需小于 ±10ms
2 调压器余量:2kVA
3 稳定耐压电阻:12.5kV
4 测试电流电压精准度:±3%
5 电压电流调控精密度较:±10% 电流大小检测可靠性强,精密度:1.5%
6 工业对试件负压:(0.5±0.05)N
7 电极建筑材料建筑材料:钨棒
8 电极片间距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 采用情况室内温度:(23±2)℃
10 动用情况温湿度:(50±5)%
11 电源线:220V±5% 50Hz
12 现场实验 方法步骤: 执行标准/美标/10 mA 接连/20 mA 不间断/30 mA接连/40 mA维持
13 耐压流程如下图所示:
| 软件段 | 电弧焊接感应电流 mA | 电孤通断周期s | 各步骤段持续不断耗时s | 可靠性试验总的时间s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连继通 | 60 | 240 | |
| 5 | 20 | 间隔通 | 60 | 300 | |
| 6 | 30 | 多次通 | 60 | 360 | |
| 7 | 40 | 不断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 号码 | 分类 | 数量统计 | 提示 |
| 01 | 耐脉冲检查仪 | 一辆 | |
| 02 | 参比电极系統 | 一款 | |
| 03 | 探针支架 | 五套 | |
| 04 | 电压落球回弹试验仪,介电击穿强度测定仪 | 整套 | |
| 05 | 等电位连接放** | 一根 | |
| 06 | 工作电流毫安表 | 几台 | |
| 07 | 我的电脑测控应用 | 一整套 | |
| 08 | 试件架 | 一套 | |
| 09 | 工业长距离标准单位块 | 2块 | |
| 10 | 坡度标准化块 | 2块 | |
| 11 | 工业陶瓷片 | 2片 | |
| 12 | 喷墨直接uv平板机 | 1台 | 项目 |
| 13 | 算机 | 1台 | 公司 |
| 14 | 便用说书 | 1份 | |
| 15 | 良好率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 设备规格型号:
NDH-A 耐电孤测试仪-微机掌控
NDH-B 耐电孤试验台仪-触摸显示屏屏操控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!