落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高输出功率小交流电检测仪(耐脉冲检测仪)-(统计机管控)

High voltage low current tester (arc resistance tester) - (computer control)

软件英文名称:耐电弧试验机

Product name: electric arc resistance tester

产品的款式:NDH-A

Product model: NDH - A

考虑标准规定:GB/T 1411-2002《固态物体绝缘电阻涂料耐高低平电流量电弧焊接自放电的实验室检测》(等同于IEC  61621-1997)及ASTM D495等规范的标准的设计制作业的,并包含IEC 149、UL 746A等试验报告方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要是实用空间及功能性:

本实验设计机是是以使应用在三相电机、电子产品和家庭装电子产品等领域的水电工用橡胶、硅橡胶胶和耐压漆等耐压涂料的耐弧光放电安全效果评判,主应用在液态耐压涂料如:橡胶、保护膜、硅橡胶、云母片、工业陶瓷、有机玻璃、耐压油、耐压漆、纸壳等物料的耐弧光放电安全效果软件测试;

本检验机由求算机掌控操作,是可以呈现目前科学试验室工作状态及科学试验室事件,科学试验室结束后后并保持目前科学试验室数据分析,并可彩印.规定测试该报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为横竖二合一结构类型,顶部为操作步骤设备,顶部为校正箱。

2 本护肤品主要采用*新自动化设定技艺,按照取舍系统软件(IEC或ASTM)可主动来进行试验检测,并在笔记本上显视检测时候和结局。

3 **耐磨性顺畅,抗干涉特性强,软件测试定位精值高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断用时差值:高于 ±10ms

2 调压器出水量:2kVA

3 载荷系数试验检测额定电压:12.5kV

4 实验电阻值gps精度:±3%

5 电流量把控精确度:±10%  电流值预估的精密度:1.5%

6 电极片对岩样压为:(0.5±0.05)N

7 电级素材:钨棒

8 电级距里:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 适用生态环境溫度:(23±2)℃

10 动用场景水分子含量:(50±5)%

11 主机电源:220V±5%  50Hz  10A

12 疲劳试验    技术:   国家标准下载/美标/10 mA 联续/20 mA 连着/30 mA间断/40 mA持续

13 疲劳试验系统下列:

系统软件段

电弧焊接瞬时电流

mA

焊弧通断日子s

各软件程序段维持时刻s

实验室检测总日子s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

接连通

60

240

5

20

反复通

60

300

6

30

持续通

60

360

7

40

多次通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

数字序号

称呼

个数

注

01

耐电孤测试英文仪

一种

 

02

电级体统

一种

 

03

金属电极橡胶支座

买套

 

04

外接电源电力电缆

1套

 

05

一定接地放**

一批

 

06

电流大小毫安表

一种

 

07

手提电脑测控工具

一款

 

08

试件材料架

一瓶

 

09

电极片多远规范块

2块

 

10

角度来标准规范块

2块

 

11

瓷器片

2片

 

12

喷墨网页热敏打印机

1台

公司

13

换算机

1台

企业品牌

14

应用解释书

1份

 

15

达标率证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 成品产品规格:

NDH-A    耐电弧放电检测仪-微机操纵

NDH-B    耐弧光测试仪-触屏屏有效控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪